Σύγκριση προϊόντων
SmartDesign 2.0
SmartPVMS
Λήψη εφαρμογής FusionSolar
Βρείτε έναν εγκαταστάτη
Βρείτε έναν διανομέα
Κοινότητα εγκαταστατών
Ιστορίες Επιτυχίας
Διαδικτυακή αίθουσα εμπειριών
Εισαγωγή συνεργάτη
Συνεργάτης ισχύος
Προώθηση ισχύος
Γίνετε συνεργάτης
Online συνομιλία
Γραμμή εξυπηρέτησης
Ερωτήσεις εγγύησης
Δημιουργία αιτήματος υπηρεσίας
Έγγραφο προϊόντος
Έξυπνος Ελεγκτής Ενέργειας
Βίντεο εγκατάστασης
Συχνές ερωτήσεις
Perform disconnection detection on optimizers and locate the disconnected ones.
Method 1: Disconnection Detection on the FusionSolar App >
Method 2: Disconnection Detection on the WebUI of the FusionSolar SmartPVMS >
Method 3: Disconnection Detection on the Local Device Commissioning Screen >
When the output is disconnected or the inverter shuts down, the optimizer can adjust the module output voltage to a safe range to ensure the safety of the construction and O&M personnel as well as firefighters.
Method 1: Turn off the AC switch between the inverter and the power grid. >
Method 2: Turn off the DC switch on the inverter. >
Method 3: Connect a switch to the DI and GND ports of the inverter to form a circuit. (For details about which DI port is used, see the corresponding inverter user manual.) The switch is turned on by default. Turn off the switch to trigger a rapid shutdown. >
Replacing an Optimizer (on the FusionSolar App) >
Replacing an Optimizer (on the Local Device Commissioning Screen) >
Checking the PV string resistance >
Disconnection Detection
Rapid Shutdown
Replacing an Optimizer
Checking the PV string resistance
Smart PV Community
μάθετε περισσότερα
Εργαλεία σχεδιασμού