Power-M-5/10/15/20/25/30 Specs | Smart Energy Storage System | Huawei FusionSolar

Power-M-5/10/15/20/25/30

Power-M
Technical Specification
Power-M-5/10/15/20/25/30
System Specifications
arrow
Power module
iSitePower-M-MAP05A1
Output / Input power per module
2.5 kW
Battery module
iSitePower-M-MAB05B1
Battery module capacity
5 kWh
Number of power modules
1
Number of battery modules
1
2
3
4
5
6
Battery usable capacity1
5 kWh
10 kWh
15 kWh
20 kWh
25 kWh
30 kWh
Max. output power
2.5kW
5 kW
5 kW
5 kW
5 kW
5 kW
Communication
arrow
Display
SOC statusindicator
Communication
CAN (for parallel communications between power modules, between battery modules and power modules, and between battery modules); WLAN/FE/4G (for connecting to the SmartPVMS)
General Specification
arrow
Power module dimension (W x H x D)
700 mm x 246 mm x 152 mm
Power module weight
17 kg
Battery module dimension (W x H x D)
700 mm x 390 mm x 158 mm
Battery module weight
50 kg
Base dimension (W x H x D)
700 mm x 65 mm x 147 mm (floor installation)
643 mm x 110 mm x 176 mm (wall-mounted installation)
Base weight
1.5 kg (floor installation)
5.5 kg (wall-mounted installation)
Installation mode
Wall-mounted/Floor-mounted
IP rating
IP66
Cell technology
Lithium-iron phosphate (LiFePO4)
AC Input
arrow
Input voltage
200 / 208 / 220 / 230 / 240 Vac
Input current
Max. 30 A
Frequency
50 / 60 Hz
Maximum bypassinput power
6 kW
Lightning protection
Differential mode (between live and neutral): 3 kA; 8 / 20 μs
Common mode (between live or neutral and PE, between live / neutral pair and PE): 5 KA; 8 / 20 μs
PV Input
arrow
MPPT voltage range
90 ~ 420 Vdc
Maximum input capacity of the MPPT
5.5 kWp
PV string quantity
2 strings
Number of MPPT channels
1 channel
Maximum input current for one string
12.5 A
Maximum short circuit current perstring
18 A
Lightning protection
Common mode (between PV+ / PV- pair and PE): ±10 KA; 8 / 20 μs
AC Output
arrow
Output
Single-phase 200 / 208 / 220 / 230 / 240 Vac. The default value is 220 Vac
Output frequency
50 / 60 Hz. The default value is 50 Hz.
Maximum output current
30 A
Output power
6 kVA / 5 kW
Power factor
0.8
Overload Capacity
arrow
102% ≤ Load ≤ 125%
30s
125% < Load ≤ 150%
10s
>150% / short circuit
0.3s
AC Parallel Box
arrow
Dimensions (W * H * D)
350 mm x 450 mm x 150 mm
Weight
Approx. 12 kg
Input voltage
200 / 208 / 220 / 230 / 240 Vac. The default value is 220 Vac.
Input current
Max. 90 A
Output voltage
200 / 208 / 220 / 230 / 240 Vac. The default value is 220 Vac.
Output current
Max. 90 A
Cable outlet mode
Bottom in and bottom out
Installation mode
Wall-mounted or pole-mounted installation
IP rating
IP55
Environmental Parameters
arrow
Operating temperature
0 °C to 45 °C
Relative humidity
5% ~ 95% (RH)
Operating altitude
0 - 4000 m (The operating temperature decreases by 1 °C per 200 m when the altitude is 2000 m to 4000 m)
Standards Compliance
arrow
Certifications
IEC62920: 2017, CISPR11: 2015+A1: 2016/EN55011: 2016+A1: 2017, EN62040-2, ETSI EN 301 489-1, ETSI EN 301 489-17, IEC61000-3, IEC 62619, IEC 62109-1, IEC 62109-2, RoHS, EN 50385, RCM, UKCA, ICE 60730, UN38.3

*1 Test conditions: 100% depth of discharge (DoD), 0.2C rate charge & discharge at 25 °C, at the beginningof life. If no PV modules are installed or the system has not detected sunlight for at least 24 hours, the minimum end-of-discharge SOC is 15%.

*2. The weight of the battery module is subject to the actual product, with a tolerance of ±3%.

*3. Refer to battery warranty letter for conditional application.

*4. Improper storage system installation may compromise product warranty and operation safety. Please follow the user manual during the installation, use, and maintenance of the storage system.

Disclaimer: the preceding values are measured by an internal laboratory of Huawei in a specific environment. The actual values may vary with products, software versions, usage conditions, and environmental factors.